| Disable Modern Standby in Windows 10 and Windows 11 Tutorial | 您所在的位置：网站首页 › silent forever › Disable Modern Standby in Windows 10 and Windows 11 Tutorial |
Disable Modern Standby in Windows 10 and Windows 11 Tutorial
|
In Windows 10 and Windows 11, there are two power models for PCs: S3 and Modern Standby (S0 Low Power Idle). The S3 power model is an older standard and is not capable of the instant on that consumers expect from modern devices. Modern Standby is capable of leveraging all the capabilities of a modern chipset and can be integrated across the breadth of tablets and PCs today. The first iteration of Modern Standby was Connected Standby, which first shipped in Windows 8 and Windows 8.1. Modern Standby expands upon the Windows 8.x Connected Standby concept, allowing for flexibility in component selection and the ability for the OS to manage network connectivity in standby. Windows 10 and Windows 11 Modern Standby (Modern Standby) expands the Windows 8.1 Connected Standby power model. Connected Standby, and consequently Modern Standby, enable an instant on / instant off user experience, similar to smartphone power models. Just like the phone, the S0 low power idle model enables the system to stay connected to the network while in a low power mode. Although Modern Standby enables an instant on/off user experience like Connected Standby, Modern Standby is more inclusive than the Windows 8.1 Connected Standby power model. Modern Standby allows for market segments previously limited to the Traditional Sleep (S3) power model to take advantage of the low power idle model. Example systems include systems based on rotational media and hybrid media (for example, SSD + HDD or SSHD) and/or a NIC that doesn’t support all of the prior requirements for Connected Standby. Modern Standby systems can be connected (enabled), disconnected (disabled), or managed by Windows to allow network connectivity during standby. This behavior is dictated by the hardware and/or by configuration. Connected Modern Standby will allow you to stay connected to the network while in standby to still receive and get notifications about email, VoIP calls, and such, but it will use more battery. Disconnected Modern Standby will allow longer battery life, but you will no longer have the advantages of staying connected to the network while in standby. Managed by Windows will allow Windows to manage network connectivity during standby. On any Modern Standby system (whether connected or disconnected), the system remains in S0 while in standby, allowing the following scenarios to work: Background activity Faster resume from a low power state On systems that are connected while in standby, wakes based on specific network patterns may also be set by the operating system to enable apps to receive the latest content such as incoming email, VoIP calls, or news articles.See also: Modern Standby Modern Standby vs S3 Modern Standby FAQs Windows ARM-based PCs FAQ Overview of Modern Standby Validation Allow networking during standbyIf you disabled Modern Standby and your PC crashes when entering S3, you can press and hold the power button to force a hard shut down, press the power button again to turn on, and enable Modern Standby below again. This can happen if the device OEM has not included support for S3 in the BIOS/UEFI firmware. You must be signed in as an administrator to enable or disable Modern Standby. You cannot enable Modern Standby on a device that didn't originally support it. Contents Option One: Enable or Disable Modern Standby using Command Option Two: Enable or Disable Modern Standby using REG file EXAMPLE: Modern Standby enabled and disabled
Option One Enable or Disable Modern Standby using Command 1 Open an elevated command prompt in Windows 10, or open Windows Terminal (Admin) in Windows 11, and select either Windows PowerShell or Command Prompt. 2 Copy and paste the command below you want to use into the console, and press Enter. (see screenshots below) (Enable Modern Standby - default)reg delete "HKLM\System\CurrentControlSet\Control\Power" /v PlatformAoAcOverride /f
Option Two Enable or Disable Modern Standby using REG file 1 Do step 2 (enable) or step 3 (disable) below for what you want. 2 Enable Modern Standby This is the default setting. A) Click/tap on the Download button below to download the REG file below, and go to step 4 below. Enable_Modern_Standby.reg Download (Contents of REG file for reference) Code: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power] "PlatformAoAcOverride"=- 3 Disable Modern Standby A) Click/tap on the Download button below to download the REG file below, and go to step 4 below. Disable_Modern_Standby.reg Download (Contents of REG file for reference) Code: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power] "PlatformAoAcOverride"=dword:00000000 4 Save the .reg file to your desktop.5 Double click/tap on the downloaded .reg file to merge it. 6 When prompted, click/tap on Run, Yes (UAC), Yes, and OK to approve the merge. 7 Restart the computer to apply. 8 You can now delete the downloaded .reg file if you like. That's it, Shawn Brink Related Tutorials Change Power Plan Settings in Windows 11 See Sleep States Available on Windows 11 PC Check if Modern Standby is Supported in Windows 11 Enable or Disable Modern Standby Network Connectivity in Windows 11 |
【本文地址】